Στοιχεία Επικοινωνίας

Ultimaker Original+

Specifications

Ultimaker Original+

From 995,00€ *excl. VAT

Ultimaker Original

From 795,00€ *excl. VAT

Ultimaker Original+

Ultimaker Original

DIMENSIONS

357 x 342 x 388 mm
(14.1 x 13.5 x 15.3 inches)

357 x 342 x 388 mm
(14.1 x 13.5 x 15.3 inches)

BUILD VOLUME

ultimaker-original-build-volume

Dimensions:
210 x 210 x 205 mm
(8.3 x 8.3 x 8.1 inches)

ultimaker-original-build-volume

Dimensions:
210 x 210 x 205 mm
(8.3 x 8.3 x 8.1 inches)

PRINTER AND PRINTING
PROPERTIES

Assembly type

DIY kit

The Ultimaker Original+ is a DIY 3D printer kit that can be easily assembled by following online instructions. If you’re looking for a pre-assembled 3D printer, check out our Ultimaker 2 Go or Ultimaker 2+.

Layer resolution

0.40 mm nozzle: 200 to 20 micron

A micron is the measurement unit used to define the thickness of a 3D printed layer. 20 micron is 0.02 mm thick. 200 micron is 0.20 mm. Thinner layers are used for high detailed prints, thicker layers are great for fast prototypes.

Build plate – Ultimaker Original+

50 ˚C to 100 ˚C heated glass build plate

Due to the 50 ˚C to 100 ˚C heated glass build plate you’re able to use a much larger selection of filaments for your prints. To clean the plate simply open the clamps and remove it.

Build plate – Ultimaker Original

Acrylic build plate with the blue tape

Using the blue tape is required to ensure a smooth print surface and good adhesion.

Build plate leveling

Manual leveling

The Cura’s configuration wizard will assist you to calibrate the build plate. The print head will first move to the left front corner, so you can adjust the screw and set the correct height. When finished, press “Resume” and the print head will move to the next point. Repeat these steps for all points.

Print technology

Fused Deposition Modeling (FDM)

This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. Also known as additive manufacturing technology, it’s the process used by all Ultimaker 3D printers.

Print head

Single extrusion print head with swappable nozzles

Swappable nozzles allow you quickly switch between different nozzles. The standard is 0.4 mm for easy maintenance.

Print head travel speed

30 to 300 mm/s

The higher print head travel speed means faster 3D prints.

XYZ accuracy

12.5, 12.5, 5 micron

The more accurate the stepper motors within the printer, the greater degree of accuracy can be achieved with each print. Our motors are engineered and tested to achieve the very highest accuracy.

Nozzle diameter

0.4 mm

Swappable nozzles allow you easy maintenance and fast nozzle replacement.

Nozzle temperature

180 ˚C to 260 ˚C

With such a large a temperature range from 180 ˚C to 260 ˚C, you have greater flexibility as to which filaments you can print with.

MATERIALS

System

Open filament system

An open filament system means you can use any kind of 3D printing material to meet your needs.

Filament diameter

2.85 mm

When purchasing filaments for your Utlimaker Original+, you must buy 2.85 mm diameter filament – this is the optimal size for your Ultimaker.

Supported materials – Ultimaker Original+

PLA, ABS, CPE

The Ultimaker Original+ is a highly flexible 3D printer and gives you the freedom to choose whatever type of filament that suits your project. The Ultimaker Original+ is optimized for Ultimaker PLA, ABS and CPE, whilst the Ultimaker Original is optimized for Ultimaker PLA.

Supported materials – Ultimaker Original

PLA

The Ultimaker Original+ is a highly flexible 3D printer and gives you the freedom to choose whatever type of filament that suits your project. The Ultimaker Original+ is optimized for Ultimaker PLA, ABS and CPE, whilst the Ultimaker Original is optimized for Ultimaker PLA.

Ultimaker filament

A spool of Ultimaker filament is 750 g

Optimized perfectly for the Ultimaker Original+, we offer a range of 750 g filaments that are 2.85 mm in diameter and approximately 90 m long.

REQUIREMENTS

Software

Cura, our free print preparation software

Cura is our industry-leading slicing and preparation software that turns your 3D model into a file your printer can use. You can download Cura for free here.

Supported OS

Free on Mac OS X, Windows and Linux

Cura works seamlessly on Mac OS X, Windows and Linux.

Supported file types

STL, OBJ and AMF

An STL file is the most used file type for 3D printing. Nearly any 3D modeling software program is able to create these files.

File transfer

Standalone SD card printing

Simply copy the G-code file that Cura created for you onto the supplied SD card and insert it into your Ultimaker Original+. No computer connection required during printing.

SAFETY AND COMPLIANCE

SERVICE AND SUPPORT

Lifetime support

Expert technical support via email, phone, or from our global community is available to you for the lifetime of your printer.

Extended support

Online resources, an easy to use app, extensive manuals, a detailed knowledgebase and so much more. You’re never far from the answers you need.

SERVICE AND SUPPORT

See the hardware components in these schematics

WHAT’S INCLUDED

  • Every part to assemble an Ultimaker Original+
  • UltiController with SD card
  • Power supply and cable, glue stick, grease, hex wrenches and USB cables
  • 750 g Ultimaker PLA
  • Online assembly manual
  • Cura, our award-winning print preparation software
  • Powerful Ultimaker app
  • Lifetime expert support
  • An active global community of makers

Η ΟΙΚΟΓΕΝΕΙΑ ULTIMAKER

  • Μικρός σε μέγεθος αλλά μεγάλος σε δυνατότητες τρισδιάστατης εκτύπωσης και σε αξιοπιστία, ο Ultimaker 2 GO είναι ένας από τους ισχυρότερους μικρούς τρισδιάστατους εκτυπωτές...
    Προσθήκη στο καλάθι
    ULTIMAKER 2 GO
    1,220.00  +Φ.Π.Α
  • Βασισμένος στον βραβευμένο Ultimaker 2 και ενσωματώνοντας όλες τις τελευταίες καινοτομίες μας και την κατανόηση της τρισδιάστατης εκτύπωσης που έχουμε, ο Ultimaker 2+ είναι...
    Προσθήκη στο καλάθι
    ULTIMAKER 2+
    1,930.00  +Φ.Π.Α
  • Ο προηγμένος εκτυπωτής μας μεγάλου μεγέθους μόλις έγινε ακόμα καλύτερος. Βασισμένος στον βραβευμένο Ultimaker 2 Extended και ενσωματώνοντας όλες τις τελευταίες καινοτομίες μας και την...
    Προσθήκη στο καλάθι
    ULTIMAKER 2 + EXTENDED
    2,530.00  +Φ.Π.Α