Ultimaker 3


Ultimaker 3


From 2.995€ *excl. VAT

Ultimaker 3 Extended

From 3.695€ *excl. VAT

Ultimaker 3

Ultimaker 3 Extended


Dimensions with bowden tube
and spool holder:

342 x 505 x 588 mm
(13.5 x 19.9 x 23.1 inches)

10.6 kg (374 ounces)

Dimensions with bowden tube
and spool holder:

342 x 505 x 688 mm
(13.5 x 19.9 x 27 inches)

11.3 kg (399 ounces)



Left or right nozzle:
215 x 215 x 200 mm
(8.5 x 8.5 x 7.9 inches)

Dual extrusion:
197 x 215 x 200 mm
(7.8 x 8.5 x 7.9 inches)


Left or right nozzle:
215 x 215 x 300 mm
(8.5 x 8.5 x 11.8 inches)

Dual extrusion:
197 x 215 x 300 mm
(7.8 x 8.5 x 11.8 inches)


Assembly type


The Ultimaker 3 is an out of the box experience and immediately ready to use, as it comes pre-assembled. If you’re looking for a DIY kit that you need to assemble yourself, check out our Ultimaker Original+.

Layer resolution

0.40 mm nozzle: 200 to 20 microns

A micron is the measurement used to define the thickness of a 3D printed layer. 20 micron is 0.02 mm thick. Thinner layers are used for high detailed prints, thicker layers are great for fast prototypes.

Build plate

20 ˚C to 100 ˚C heated glass build plate

Thanks to the 20 ˚C to 100 ˚C heated build plate you can use a wide selection of 3D printing materials.

Build plate leveling

Active leveling

The new active leveling system ensures more accurate build plate calibration and better adhesion. The capacitive sensor in the print head measures distances between the build plate and the nozzle, and the tilt angle is compensated by adjusting the z height in the first layers.

Print technology

Fused Deposition Modeling (FDM)

This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. Also known as additive manufacturing technology, it’s the process used by all Ultimaker 3D printers.

Print head

Dual extrusion print head

Thanks to swappable print cores, you can quickly switch between different filaments and material-matching print cores. This results in higher uptime and easier maintenance of your 3D printer.

Print core replacement

Swappable print cores

The Ultimaker 3 comes with swappable print cores with a customized inner nozzle geometry for build (AA) and support (BB) materials. This ensures low nozzle clogging risks, fast changeovers and easy maintenance.

Build speed

0.40 nozzle: up to 16 mm³/s

The build speed relates to how fast the filament can be extruded through the hot end of the 3D printer. The higher the value the greater the achievable print speed.

Print head travel speed

30 to 300 mm/s

Travel speed relates to how quickly the print head can move.

Feeder type

Dual geared feeder

The new dual geared feeders exert more force on the filament, and also eliminate heat exposure from the motor. You can easily insert or remove your 3D printing materials and select the correct pressure with a push on a button.

XYZ accuracy

12.5, 12.5, 2.5 micron

The more accurate the stepper motors within the printer, the greater degree of accuracy can be achieved with each print. Our motors are engineered and tested to achieve the very highest accuracy.

Nozzle diameter

0.4 mm

The swappable print cores mean easy and fast material changeovers, seamless 3D printing experience and more time-efficient workflow. The list of supported material combinations and nozzle sizes will be expanded in the future.

Nozzle temperature

180 ˚C to 280 ˚C

A wide nozzle temperature range means greater flexibility in the 3D printing material choice.

Nozzle heat up time

< 2 minutes

The nozzle heat up time relates to how fast you can start printing, as well as how fast it can melt the plastic.

Build plate heat up time

< 4 minutes

The build plate heat up time relates to how fast it can reach the print-ready temperature.

Operating sound

50 dBA

Thanks to the low level of operating sound, Ultimaker 3D printers are suitable for use in the office, school and home environment.



Open filament system

An open filament system means you can use any type of 3D printing material that meets your specific requirements.

Filament diameter

2.85 mm

When purchasing filaments for your Ultimaker 2+, you must buy 2.85mm diameter filament – this is the optimal size for your Ultimaker.

Supported materials

Nylon, PLA, ABS, CPE and PVA

The Ultimaker 3 is a highly flexible 3D printer and gives you the freedom to choose whatever type of filament that suits your project. The Ultimaker 3 is optimized for Ultimaker Nylon, PLA, ABS, CPE and PVA with more materials to come.

Ultimaker filament

A spool of Ultimaker filament is 750 g

Optimized perfectly for the Ultimaker 3, we offer a range of 750 g filaments that are 2.85mm in diameter and approximately 90 meters long.



Cura, our free print preparation software

Cura is our industry-leading slicing and preparation software that turns your 3D model into a file your printer can use. You can download Cura for free here.

Supported OS

Free on Mac OS X, Windows and Linux

Cura works seamlessly on Mac OS X, Windows and Linux.

Supported file types

STL, OBJ and 3MF

An STL file is the most used file type for 3D printing. Nearly any 3D modeling software program is able to create these files.

File transfer

WiFi, LAN or USB

Simply copy the .gcode file that Cura created for you onto the supplied USB stick and insert it into your Ultimaker 3 or start your print project using the WiFi / LAN connection.

Operating ambient temperature

15 ˚C to 32 ˚C (59 °F to 89 °F)

Your Ultimaker 3 operates at its best at these temperatures.

Nonoperating temperature

0 ˚C to 32 ˚C (32 °F to 89 °F)

Your Ultimaker 3 can be stored or left inactive at these temperatures.


100 – 240 V
4A, 50-60 Hz
221 W max.


24 V DC, 9.2 A




Our dedicated network of local service partners provides Ultimaker 3 training (recommended).


You’ll enjoy a comprehensive 12-month warranty (excl. print core)

Lifetime support

Expert technical support via email, phone, or from our global community is available to you for the lifetime of your printer.

Extended support

Online resources, an easy to use app, extensive manuals, a detailed knowledgebase and so much more. You’re never far from the answers you need.


Equal for the Ultimaker 3 and Ultimaker 3 Extended


  • A USB stick, glue stick, grease, hex wrenches and USB and Ethernet cables
  • Two swappable 0.4 AA print cores
  • A swappable 0.4 BB print core
  • A 350 g spool of Ultimaker PLA
  • A 350 g spool of Ultimaker PVA
  • A spool holder with an NFC cable
  • A calibration card and XY calibration sheet
  • Cura, our award-winning print preparation software
  • Powerful Ultimaker app
  • Comprehensive 12-month warranty
  • Lifetime expert support


  • Μικρός σε μέγεθος αλλά μεγάλος σε δυνατότητες τρισδιάστατης εκτύπωσης και σε αξιοπιστία, ο Ultimaker 2 GO είναι ένας από τους ισχυρότερους μικρούς τρισδιάστατους εκτυπωτές...
    Προσθήκη στο καλάθι
    1,220.00  +Φ.Π.Α
  • Βασισμένος στον βραβευμένο Ultimaker 2 και ενσωματώνοντας όλες τις τελευταίες καινοτομίες μας και την κατανόηση της τρισδιάστατης εκτύπωσης που έχουμε, ο Ultimaker 2+ είναι...
    Προσθήκη στο καλάθι
    1,930.00  +Φ.Π.Α
  • Ο προηγμένος εκτυπωτής μας μεγάλου μεγέθους μόλις έγινε ακόμα καλύτερος. Βασισμένος στον βραβευμένο Ultimaker 2 Extended και ενσωματώνοντας όλες τις τελευταίες καινοτομίες μας και την...
    Προσθήκη στο καλάθι
    2,530.00  +Φ.Π.Α