SPECTRUM-PLA-Glitter-1-75mm-VOLCANO-GREY-0-5kg

SPECTRUM PLA Glitter 1.75mm – 0.5kg – VOLCANO GREY

15.90  Στην τιμή συμπεριλαμβάνεται ΦΠΑ

Using Spectrum PLA Filament you 3D model will obtain:

– warping resistance

– durability and stability of printout

– high quality

2 σε απόθεμα

Κωδικός προϊόντος: 00126 Κατηγορίες: ,

Product Description

Explore beautiful gloss effect

PLA Glitter is a highly aesthetical material blended with high-glitter particles. The particle content in the filament increases the hardness and compression resistance of printed items. These properties are improved at the cost of the higher brittleness of items. There is a possibility to control the gloss level by increasing/decreasing the wall thickness.

Due to the content of infusible particles, it is necessary to use printing nozzles with diameters of 0.4mm or more.

Key features:

  • not abrasive
  • improved hardness and compression resistance as compared to PLA without admixtures
  • user friendly
  • high-gloss surfaces, which reduces the visibility of layers on the side face of the printed items
  • no shrinkage after cooling
  • the possibility to obtain a perfect side surface
  • easy to print

Applications:

  • interior design articles
  • advertising materials
  • eductational projects
  • any areas where it is essential to present specific geometric figures in an eye-catching manner

Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Whole product packed in the original, folied Spectrum Filaments packaging.

General information
Color:
Volcano Grey
Diameter:
1.75mm
Dimensional tolerance:
± 0.05mm
Printing temperature:
185-230°C
Heated bed:
not needed
Total weight:
800g
Spool dimensions:
external diameter – 20cm, internal diameter – 5,2cm, width 5,2cm
Physical & termal properties of raw material
Specific Gravity:
1.24 g/cc
MFR (210°C / 2.16kg), g/10 min:
6 (D1238)
Heat Distortion Temperature:
55°C
Tensile Strength at Break:
53 MPa (ASTM D882)
Tensile Yield Strength:
60 MPa (ASTM D882)
Tensile Modulus:
3.5 MPa (ASTM D882)
Impact resistance:
16 J/m (ASTM D256)