eng_pl_Filament-PLA-Special-2-85mm-STONE-AGE-LIGHT-1kg-581_3
eng_pl_Filament-PLA-Special-2-85mm-STONE-AGE-LIGHT-1kg-581_1eng_pl_Filament-PLA-Special-2-85mm-STONE-AGE-LIGHT-1kg-581_5eng_pl_Filament-PLA-Special-2-85mm-STONE-AGE-LIGHT-1kg-581_6

Filament PLA Special 2.85mm STONE AGE LIGHT 1kg

24.80  Στην τιμή συμπεριλαμβάνεται ΦΠΑ 24%

Using Spectrum PLA Filament you 3D model will obtain:
– warping resistance
– durability and stability of printout
– high quality

Product Description

Stone Filaments – series of materials imitatng stone, created on the basis of PLA. The Stone type filament manufactured in two colors: Stone Age Light and Stone Age Dark, is characterized by excellent masking of the layers. Printed objects show roughness similiar to the real stone. Spectrum Stone filaments are widely used among others in printing architectural and decorative models.

Using Spectrum PLA Filament you 3D model will obtain:

  • warping resistance
  • durability and stability of printout
  • high quality

PLA Stone Age Series advantages:

  • made from biodegradable materials
  • beautiful stone effect
  • PLA based
  • highest quality surface
  • warp-free printing
  • easy to print
  • printing possible without hot pad
  • relatively low melt temperature

Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Color:
marble
Diameter:
2.85mm
Dimensional tolerance:
± 0.05mm
Printing temperature:
195-230°C
Heated bed:
not needed
Net weight:
1000g
Total weight:
1400g
Spool dimensions:
external diameter – 20cm, internal diameter. 5,2cm, width. 6,7cm
Physical & thermal properties of raw material
Specific Gravity:
1.24 g/cc
MFR (210°C / 2.16kg), g/10 min:
6 (D1238)
Heat Distortion Temperature:
55°C
Tensile Strength at Break:
53 MPa (ASTM D882)
Tensile Yield Strength:
60 MPa (ASTM D882)
Tensile Modulus:
3.5 MPa (ASTM D882)
Impact resistance:
16 J/m (ASTM D256)