eng_pl_Filament-PLA-SILK-1-75mm-Tropical-Green-1kg-1184_1

FILAMENT PLA SILK 1.75mm Tropical Green 1kg

23.00  Στην τιμή συμπεριλαμβάνεται ΦΠΑ 24%

Spectrum PLA SILK is a filament for the incremental production on the basis of PLA with the use of coloring concentrates that give the effect of a satin structure of the manufactured elements. This is a unique material with extremely aesthetic qualities.

Product Description

Spectrum PLA SILK is a PLA-based filament for additive manufacturing with colour concentrates which imparts the satin texture effect to printed items. It is another material with unique aesthetic properties. The surface satin texture of printed items largely reduces the visibility of layers on the side surface of printed items. Using a specially development pigment, it is possible to retain the classic properties of PLA, i.e. the simple and efficient printing, while obtaining a very low shrinkage rate and relatively high tensile strength. Thus the material is designed for those who appreciate simple printing and very high aesthetic properties,

PLA SILK advantages:

  • reduced visibility of layers on the side surfaces of printed items,
  • satin shine on the entire surface of printed items,
  • easy separation of the object from the table,
  • high strenghtness,
  • relatively low melt temperature,
  • no shrinkage after cooling.

Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

General information
Color:
Green
RAL:
9017
Diameter:
1.75mm
Dimensional tolerance:
± 0.05mm
Printing temperature:
185-230°C
Heated bed:
not needed
Net weight:
1.00kg
Total weight:
1.40kg
Spool dimensions:
śr. zewn. – 20cm, śr. wewn. – 5.2cm, szer. – 7.5cm
Physical and thermal properties
Specific Gravity:
1.24 g/cc
MFR (210°C / 2.16kg), g/10 min:
6 (D1238) [eng]
Heat Distortion Temperature:
55°C
Tensile Yield Strength:
60 MPa (D882)
Tensile Modulus:
3.6 MPa (D882)