Bambu Lab Complete Hotend Assembly – X1 Series

39.00  με ΦΠΑ 

SKU: 06058
Μέχρι τις 04/01/2025, δωρεάν, μεταφορικά για όλες τις παραγγελίες άνω των 199 Ευρώ, σε Bambu Printers & Accessories.

Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

图片加载失败文案

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

图片加载失败文案

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

图片加载失败文案

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1 Series 3D printers.

Filament Compatibility

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA YES YES YES YES Optional
PLA Sparkle *NO YES YES YES Optional
PLA Marble *NO YES YES YES Optional
Wood/Rock/Metal-filled PLA *NO YES YES YES Optional
PETG YES YES YES YES Optional
PVA YES YES YES YES Optional
ABS YES YES YES YES Optional
ASA YES YES YES YES Optional
PC YES YES YES YES Optional
PA *NO YES YES YES Optional
TPU *NO YES YES YES Optional
Bambu PLA-CF *NO *Highly
Recommended
YES YES *Required
Bambu PETG-CF *NO *Highly
Recommended
YES YES *Required
Bambu PAHT-CF *NO YES *Highly
Recommended
YES *Required
Bambu PET-CF *NO YES *Highly
Recommended
YES *Required
CF/GF Filaments from other brands *NO Not Recommended YES YES *Required

[*Note]

  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

Learn more about filament compatibility on Bambu Lab Wiki.

Configuration of Bambu Hotend

图片加载失败文案

If you need to swap your nozzle, you can either replace the Hotend with Nozzle on your original complete hotend assembly or replace the whole Complete Hotend Assembly.

Learn more about replacing the complete hotend assembly on Bambu Lab Wiki.

In the Box

– Complete Hotend Assembly – X1 Series
– M3-14 Step Screws * 2

Compatibility

X1 and X1C (not for X1E)

Product Specifications

Max. Printing Temp. 300 ℃ Length 47.3 mm
Packaging Weight 40 g Packaging Size 190*70*50 mm
Size

, , ,

Εταιρία

Bambu Lab

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Μόνο συνδεδεμένοι πελάτες που έχουν αγοράσει αυτό το προϊόν μπορούν να αφήσουν μία αξιολόγηση.

Highlights of Various Nozzle Diameters

0.2mm Nozzle Optimal Print Fineness

Extremely small layer gaps More detailed on the vertical print surface

图片加载失败文案

0.2mm Nozzle Optimal Print Fineness

Smaller diameter extrudes thin filaments High resolution on the horizontal print surface

图片加载失败文案

0.6mm and 0.8mm Nozzle Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

图片加载失败文案
The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1 Series 3D printers.

Filament Compatibility

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA YES YES YES YES Optional
PLA Sparkle *NO YES YES YES Optional
PLA Marble *NO YES YES YES Optional
Wood/Rock/Metal-filled PLA *NO YES YES YES Optional
PETG YES YES YES YES Optional
PVA YES YES YES YES Optional
ABS YES YES YES YES Optional
ASA YES YES YES YES Optional
PC YES YES YES YES Optional
PA *NO YES YES YES Optional
TPU *NO YES YES YES Optional
Bambu PLA-CF *NO *Highly Recommended YES YES *Required
Bambu PETG-CF *NO *Highly Recommended YES YES *Required
Bambu PAHT-CF *NO YES *Highly Recommended YES *Required
Bambu PET-CF *NO YES *Highly Recommended YES *Required
CF/GF Filaments from other brands *NO Not Recommended YES YES *Required
[*Note]
  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.
Learn more about filament compatibility on Bambu Lab Wiki.

Configuration of Bambu Hotend

图片加载失败文案
If you need to swap your nozzle, you can either replace the Hotend with Nozzle on your original complete hotend assembly or replace the whole Complete Hotend Assembly.
Learn more about replacing the complete hotend assembly on Bambu Lab Wiki.

In the Box

- Complete Hotend Assembly - X1 Series - M3-14 Step Screws * 2

Compatibility

X1 and X1C (not for X1E)

Product Specifications

Max. Printing Temp. 300 ℃ Length 47.3 mm
Packaging Weight 40 g Packaging Size 190*70*50 mm
Δεν υπάρχουν ακόμα αξιολογήσεις

Εκδήλωση ενδιαφέροντος

Ενδιαφέρεστε για το προϊόν Bambu Lab Complete Hotend Assembly – X1 Series; Στείλτε μας μήνυμα και θα επικοινωνήσουμε μαζί σας σύντομα.