Bambu Lab P1S Combo – 3D Printer

Original price was: 1,099.00 €.Η τρέχουσα τιμή είναι: 849.00 €. με ΦΠΑ 

23% Off

Το P1S Combo είναι τo νέο μοντέλο της Bambu και έρχεται μαζί με το AMS για να κάνει τις εκτυπώσεις σας ακόμη καλύτερες.  Εξαιρετική ποιότητα, εκπληκτική ταχύτητα και στη πιο προσιτή τιμή που θα βρείτε μόνο στη Thes3D .

The Bambu Lab P1S is like its predecessor one of the front edge high-speed printers on the market. Enclosed with a proper cooling setup, the P1S enables better print performance with a wider range of advanced filaments. Furthermore, the P1S is equipped with an activated carbon filter to provide a solution for printing filaments such as ABS that are prone to emitting odors and harmful gases during the printing process.

Highlights

  • Includes the Automatic Material System
  • Up to 20000 mm/s acceleration, prints a benchy in 18min
  • Works right out of the box, set up in 15 minutes
  • Enclosed-body for high-temperature filament printing
  • Well-polished hardware and software

Δώρο 1 νήμα Bambu Lab Basic PLA

SKU: 05370

Εξαντλημένο

Multi-color capability

Get the AMS combo to unleash Multi-color printing capability. (up to 16-color if you stack up 4 AMS units). Purchase additional AMS units for more colors.

Print fast with exceptional quality

Cutting-edge control algorithm with the help of vibration compensation and pressure advance, bringing you lightning-fast print speed without compromising on quality.

Fully loaded with advanced features

Filament run-out sensor, Semi-automatic belt tensioning, Direct-drive extruder Welded frame, All-metal Hotend, Enclosure

Sync with Bambu Studio and Bambu Handy

All advanced features of P1S printer: Learn more

Parameters Comparison

P1P P1S
Build Volume(WxDxH) 256 x 256 x 256 mm³
Shell Open frame (Printable Modplates Available) Enclosed (Plastic & Glass)
Hot End All-Metal
Nozzle Stainless Steel
Max Hot End Temperature 300 ℃
Nozzle Diameter

0.4 mm (Included)

0.2 mm, 0.6 mm, 0.8 mm (Optional)

Build Plate Surface Compatibility

Bambu Textured PEI Plate, Bambu Cool Plate,

Bambu Engineering Plate, Bambu High Temperature Plate

Max Build Plate Temperature 100℃
Max Speed of Tool Head 500 mm/s
Max Acceleration of Tool Head 20 m/s²
Control Board Fan Optional Closed Loop Control
Chamber Temperature Regulator Fan Optional Closed Loop Control
Auxiliary Part Cooling Fan Optional Closed Loop Control
Air Filter Optional Activated Carbon Filter
Supported Filament

Ideal: PLA, PETG, TPU, PVA, PET

Capable: PA, PC, ABS, ASA

Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA

Capable: PA, PC

Chamber Monitoring Camera

Low Rate Camera 1280 x 720/0.5fps

Timelapse Supported

Filament Run Out Sensor Yes
Physical Dimensions

P1P:386 * 389 * 458 mm³,

Package size 485 × 480 × 528 mm³,

Net weight 9.65kg, Gross weight 14.30 kg

P1S:389 * 389 * 458 mm³,

Package size 485 × 480 × 530 mm³,

Net weight 12.95kg,  Gross weight 17.60 kg

P1S Combo:Package size 485 × 480 × 585 mm³,

Gross weight (AMS included) 21.60 kg

Electrical Requirements 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350W@110V

Unboxing Bambu Lab P1S

What’s in the box

Bambu Lab P1S

Stainless Steel Hotend with Nozzle

Build Plate

Bambu PLA Filament

Unclogging Pin Tool

Power Cable

Accessory Box

P1S Combo Add-ons

Bambu Lab AMS

Spare Filament Cutter (x2)

Bambu Bus Cable-6Pin

Bambu Bus Cable-4Pin

Bambu PLA Filament

Bambu Filament-Support for PLA

FAQ 
Βάρος 21.60 κ.
Διαστάσεις 48 × 48 × 59 cm

Εταιρία

Bambu Lab

Multi-color capability

Get the AMS combo to unleash Multi-color printing capability. (up to 16-color if you stack up 4 AMS units). Purchase additional AMS units for more colors.

Print fast with exceptional quality

Cutting-edge control algorithm with the help of vibration compensation and pressure advance, bringing you lightning-fast print speed without compromising on quality.

Fully loaded with advanced features

Filament run-out sensor, Semi-automatic belt tensioning, Direct-drive extruder Welded frame, All-metal Hotend, Enclosure

Sync with Bambu Studio and Bambu Handy

All advanced features of P1S printer: Learn more

Parameters Comparison

P1P P1S
Build Volume(WxDxH) 256 x 256 x 256 mm³
Shell Open frame (Printable Modplates Available) Enclosed (Plastic & Glass)
Hot End All-Metal
Nozzle Stainless Steel
Max Hot End Temperature 300 ℃
Nozzle Diameter

0.4 mm (Included)

0.2 mm, 0.6 mm, 0.8 mm (Optional)

Build Plate Surface Compatibility

Bambu Textured PEI Plate, Bambu Cool Plate,

Bambu Engineering Plate, Bambu High Temperature Plate

Max Build Plate Temperature 100℃
Max Speed of Tool Head 500 mm/s
Max Acceleration of Tool Head 20 m/s²
Control Board Fan Optional Closed Loop Control
Chamber Temperature Regulator Fan Optional Closed Loop Control
Auxiliary Part Cooling Fan Optional Closed Loop Control
Air Filter Optional Activated Carbon Filter
Supported Filament

Ideal: PLA, PETG, TPU, PVA, PET

Capable: PA, PC, ABS, ASA

Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA

Capable: PA, PC

Chamber Monitoring Camera

Low Rate Camera 1280 x 720/0.5fps

Timelapse Supported

Filament Run Out Sensor Yes
Physical Dimensions

P1P:386 * 389 * 458 mm³,

Package size 485 × 480 × 528 mm³,

Net weight 9.65kg, Gross weight 14.30 kg

P1S:389 * 389 * 458 mm³,

Package size 485 × 480 × 530 mm³,

Net weight 12.95kg,  Gross weight 17.60 kg

P1S Combo:Package size 485 × 480 × 585 mm³,

Gross weight (AMS included) 21.60 kg

Electrical Requirements 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350W@110V

Unboxing Bambu Lab P1S

What's in the box

Bambu Lab P1S

Stainless Steel Hotend with Nozzle

Build Plate

Bambu PLA Filament

Unclogging Pin Tool

Power Cable

Accessory Box

P1S Combo Add-ons

Bambu Lab AMS

Spare Filament Cutter (x2)

Bambu Bus Cable-6Pin

Bambu Bus Cable-4Pin

Bambu PLA Filament

Bambu Filament-Support for PLA

FAQ 
Βάρος 21.60 κ.
Διαστάσεις 48 × 48 × 59 cm
Δεν υπάρχουν ακόμα αξιολογήσεις

Εκδήλωση ενδιαφέροντος

Ενδιαφέρεστε για το προϊόν Bambu Lab P1S Combo – 3D Printer; Στείλτε μας μήνυμα και θα επικοινωνήσουμε μαζί σας σύντομα.

Σχετικά προϊόντα με το Bambu Lab P1S Combo – 3D Printer...