Produce large high resolution objects at a fraction of the cost of other 3D printers.
Build Volume 470 x 240 x 340mm
Liquid Crystal Display
Integral to the printer is the unmodified Ultra High Definition LCD panel used to cure the resin. Whilst the XY pixel size of 137 microns gives accuracy and fine detail, the high brightness and high contrast also contributes to building faithful representations of your 3D models.
Large Print Plate
The Print Plate is made from an aluminium tooling plate to ensure flatness and resistance to corrosion. Perforated, it allows resin to flow and with its roughened finish it ensures a good print adhesion.
Durable Vat System
The skin of the vat is 100 micron FEP film with a flexible, non-stick surface to ensure a good release of the printed part from the screen. Being thick and durable, it’ll last for days of printing and it’s two Neoprene gaskets ensure the vat is totally sealed. To guarantee performance consistency, the vat film and gaskets can be replaced as necessary for your hundreds of prints.
Strong & reliable drive units
There are two maintenance-free drive units featured in the Liquid Crystal Pro. Using 2mm pitch lead-screws and anti-backlash lead-nuts for precise, they deliver repeatable positioning. Combined with the extruded rail profile preventing misalignment, they both provide twice the lifting power of the Liquid Crystal HR.
Daylight Precision Resins
Specially formulated for use on the Liquid Crystal Pro. Our daylight Pro resins provide a full range of end properties from photopolymers highly active in the visible spectrum.
Photocentric Resin Cleaner the new advanced cleaning solution for 3D Post Processing!
Edit, slice & print!
The printer comes with our new software, Photocentric Studio, a complete and comprehensive solution for all users from hobbyists to professionals. Liquid Crystal users now have everything readily available in one user-friendly package; where you can prepare, edit and slice 3D files, all from just one software.
Daylight polymer printing
82 × 49 x 74 cm
33 × 20 x 29 in
(W) x (D) x (H)
66 Kg (145 Lbs)
100–240 V, UK/USA/EU plug
9.7″ (2048×1536 px)
USB, Wireless, Ethernet
Interactive 7″ Touch-screen
Resin Fill system
196 x 147 x 250 mm
7.7 x 5.8 x 9.8 in
50, 100 microns
0.002, 0.004 inches
XY pixel density
Cure speed at 100 micron
25-55 sec/layer (depending on resin)
PRINTER PACK CONTENTS
Disposable Vat x 2
Strainer x 5
Blue Nitrile Gloves- Medium x 2
250gr of Daylight Hard Cream Resin
USB Memory Stick
Built-In PrintFlow Printer Controller
– Version 0.66
– Wifi/Ethernet Enabled
– Storage Capacity: 11Gb
Minimum Computer Requirements:
– Operating System Windows 7, 8 or 10
– Minimum 2.0 Ghz processor speed 2 cores. Recommended 4 cores
– GPU capable of opening OpenGL version 3.0 or higher
– NET framework version 4.0
– 64bit system: recommended 4GB
– 32bit system: recommended 2GB
1 year warranty
*Subject to availability in your territory
Contains all of the contents listed above along with set-up, initial training and support. Enquire Today!